EPA Certified wood add-on furnace
No fire in wood add-on furnace, Made in USA
High-tech XBT™ Firebox.
Blower and thermostat and Outside Air Hookup connector beside blower
Close-up of wood add-on furnace blower
Straight front of the warm air furnace
Warm air furnace burning in lab
Arched cast iron door

Summers Heat 3,000 Sq. Ft. Add-on Wood Furnace

Wood: 50-SHW40

Our EPA Certified Add-On Furnace has been called the "work horse" of our stove family.

This stove can be hooked into your homes ductwork to supplement your existing heating system or you can "dump" the heat directly into a workshop or other large area. The large, 850 CFM blower with thermostat pushes hot air through an 8 in. hot air outlet on top of the stove, and when this hot air is routed into your home's existing duct-work, it can heat up to 3,000 sq. ft..

The arched cast iron door and extra-large door glass allow you to check on your fire from the top of your stairs if the stove is in a basement, or from across the room if you place it in a large area. The 3.5 cu. ft. firebox can accept logs up to 20 in., and the large ash pan below the firebox means that you will have ample room to collect the ash from those big logs.

Satin black color accented with stylish nickel cool touch handles to look great in any room.

Features:

Efficiency:

  • Heats up to 3,000 sq. ft. when fed into your existing ductwork; supplements existing furnace
  • High-tech non-catalytic XBT ™ firebox produces maximum results from your fuel
  • EPA Certified translates into very clean, efficient burns – you use less fuel for the same amount of heat than non-certified stoves
  • Outside air hook-up provides fresh air for excellent fuel combustion
  • Large 850 CFM blower aids in whole-house heat circulation

Value:

  • Cast iron door and quality steel body promise years of durable service
  • Blower (and thermostat for blower) included for an added value of nearly $300
  • Stylish cool touch nickel handles are included to fit the décor of any home

Convenience:

  • Accepts 20 in. logs, which means less log cutting than with smaller stoves
  • Extra-large ash drawer for easy ash removal
  • 6 in. top vent fits standard stove pipe and allows for easier installation
  • 8 in. hot air outlet can feed into ductwork or dump into your room (great for heating a shop area, for example)
  • Large viewing glass – check on your fire from across the room or the top of your stairs

Quality and Charm:

  • Arched door design with large door glass and air wash system offers a clear, beautiful view of the fire
  • Meets UL and CSA standards for product safety
  • Proudly made in U.S.A. and supported by our own Technical Support staff

Note- This product is not Mobile Home approved



Dimensions
27" W x 40" H x 33 1/2" D
Weight
545 lbs.
Door opening
11” x 15”
Door glass
11 1/4" x 15 1/8"
Firebox size
3.5 cu. ft.
Flue size (I.D.)
6"
Flue height to top exhaust
Approx. 40"
Hot air outlet
8"
Type of fuel
Wood
Max. log length
20"
Ash drawer
Front (large)
Blower
850 cfm

Options

Outside Air Kit
AC-OAK3
Creosote Remover & Stove Cleaner
RX-CRKIT
Ash Vacuum (by Shop Vac)
AC-SV
Ash Vacuum
AC-AV
Ash Vacuum (Quiet)
AC-AV2
Ash Vacuum Tool Kit
AC-AVT
Ash Vacuum Filter Package
AC-AVF
  • AC-SB Firebrick $2.43

    9" x 4" x 1.25" Firebrick (small). Priced per brick.

  • AC-SHN Nickel Spring Handle $3.64

    Door spring handle (large). Color: Brushed Nickel. Fits our standard 1/2" diameter door handle rod for our stoves.

  • AC-SH4N Nickel Spring Handle $2.43

    Spring Handle for Slide Damper. Color: Nickel. Fits 1/4" diameter rod.

  • AC-FCGK Flue Collar Gasket Kit $14.55

    Flue Collar Gasket Kit. Includes gasket and cement necessary to repair gasket around the stove's flue collar. 3/8" gasket.

  • AC-GGK Glass Gasket $14.55

    Window glass gasket kit. Includes gasket (approx. 1" x 7' flat, adhesive on one side). Does not include glass.
    Includes self-adhesive backing for easy strip and press application.
    Is also used as Ash Pan gasket on some stoves, see your stove's parts diagram or owner's manual for reference.

  • AC-RTV3 Silicone $10.91

    3 oz. tube black silicone. Tested to 425 degrees F.

  • AC-2835BA Assembled Blower $295.81

    Complete blower assembly for our add-on wood furnace. Includes blower motor (BM-1376), thermostat (AC-1339) and power cord, assembled.
     

  • AC-1339 Thermostat for Blower $83.64

    HW Thermostat for 28-3500 (fan thermostat for blower). Included are thermostat (as pictured) and instructions.
     

  • BM-1376 Blower Motor $212.17

    Blower Motor for our add-on furnace; 850 cfm.
    NOTE: Does not include thermostat (AC-1339) or power cord.   If you want the entire assembly (blower motor, thermostat and power cord), see AC-2835BA.

  • AC-HP Hinge Pin Rivet $1.25

    Hinge Pin Rivet for cast stove door; 3/8" x 1 3/4". Price shown is for one pin.

  • AC-1677 Stovetop Adapter $14.84

    Reduces 6" pipe down by 1/8" smaller inside diameter.
    Good for fitting 6" wood stove pipe to a stove that has a collar that is slightly smaller than 6". Approximately 4 1/2" in length.

  • AC-BD8 8” Butterfly Damper $42.70

    Eight-inch (8") directional butterfly damper. To be installed in the 8" hot air outlet pipe from the add-on furnace, as shown in the Owner's Manual. Damper and pipe section, 8" diameter x approximately 8" long.

  • CA-21A 8” Flue Collar $13.13

    Flue Collar, 8" diameter with "finger tabs" to fit to hot air outlet on the add-on wood furnace. Galvanized.

  • AC-SH4 Spring Handle $2.43

    Spring Handle for Slide Damper. Color: Brass. Fits 1/4" diameter rod.

  • AC-SH Spring Handle $3.64

    Door spring handle (large). Color: Brass. Fits our standard 1/2" diameter door handle rod on our stoves.

  • AC-G30 Glass Kit $135.17

    Door Glass Kit. Includes 15.125" x 11.25" glass, and gasket necessary to install.
     

  • AC-DGKNC Door Gasket Kit $14.55

    Door Gasket Kit for models that specify AC-DGKNC. Includes silicone necessary to install; 5/8" round gasket.

  • AC-SB2 Firebrick $2.43

    4" x 2" x 1.25" Firebrick. Priced per brick. Weight is based on UPS shipping weight.

  • AC-SB2.5 Firebrick $2.43

    4" x 2.5" x 1.25" Firebrick. Priced per brick. Weight is based on UPS shipping weight.

  • AC-30BT1 Front Burner Tube $28.75

    Front burner tube (stainless steel). Fits in the firebox ceiling, toward the front (door side) of the unit.

  • AC-30BT2 Second Burner Tube $28.75

    Second burner tube from front (door side) of unit (stainless steel). Fits in the firebox ceiling.

  • AC-30BT3 Third Burner Tube $28.75

    Third burner tube from front (door side) of unit (stainless steel). Fits in the firebox ceiling.

  • AC-30BT4 Rear Burner Tube $28.75

    Rear burner tube, fits in back of unit. Fits in the firebox ceiling.

  • AC-30CFB Ceramic Fiber Board $60.06

    Ceramic Fiber Board for firebox. Two boards per stove; price shown is for one board. Both boards are the same size and item number. Rests on top of the burner tubes.

  • AC-ADW01 Ash Drawer 38.50

    Ash Drawer. Large size helps reduce time between clean-out.
    Pictured installed in model.

  • AC-MBSP Black Spray Paint $13.13

    High-temperature black spray paint. 12 oz. can.  Two cans of paint should paint your entire unit.

  • AC-6DBK-AD Flue Collar Pipe Adapter 14.04

    Reduces 6" pipe down by 1/8" smaller inside diameter. 
    Good for fitting 6" wood stove pipe to a stove that has a collar that is slightly smaller than 6". Approximately 4 1/2" in length.

    Inner diameter: 6"

    Height: 4"

    UL Listed

Wood stoves, by design, are easier to use and maintain than nearly any other home heating source.

However, please keep your Owner's Manual on hand so that you can refer to it for the basic maintenance procedures such as ash clean-out, etc. --

and if you do need to replace any parts, simply call us or log onto the England's Stove Works Store page to order your parts, quickly and easily.

Feel free to download your stove's Owner's Manual, below.

28-4000 usandcanada-

Summers Heat 3,000 Sq. Ft. Add-on Wood Furnace

England's Stove Works is proud to offer an extensive support section on our web site.

And you may always reach us by email at service@englanderstoves.com

How can I get a copy of my product’s Owner’s Manual?

Although every stove ships from the factory with a printed Owner's Manual, a copy of your Owner's Manual may be obtained free of charge when you download it from this web site.

Simply navigate to your stove (or grill) model in our Products pages (choose your brand from the Home page and find your model) and click on the Manuals tab at the bottom of your model's page.

Your manual will be available as a .pdf file for you to download and/or print at your convenience. Click Here if you need a free copy of Acrobat Reader to read .pdf files.

How do I install the 3” outside air kit?

Outside air hook-up for wood stoves is a great choice, and in some cases, mandatory.

Click Here for instructions on installing our AC-OAK3 outside air kit.

Do you have a parts list and brick diagram for the EPA Certified Wood Add-On Furnace? (Models with 40 in the model number)

Click here for a parts list, exploded diagram and a brick layout diagram for the EPA Certified wood add-on furnace

What kind of warranty do I get with my wood stove?

All of our wood stoves come with

a Limited 5-year warranty on the Firebox, and 1-Year Limited warranty on components (and more!).

Click Here to check out a generic copy of our wood stove warranty (be sure to check your Owner's Manual for the specific warranty for your model).

Tell me more about your ash vacuum system

An ash vacuum will make cleaning your wood stove, pellet stove or pellet grill much easier, and a great ash vacuum can make the job (almost) enjoyable.

Click Here to read more about our popular ash vacuum system

Click Here to visit our online store page and check out our ash vacuums and accessories

Do you have a Troubleshooting Guide I can check out?

Yes! Actually, there are multiple ways to troubleshoot your stove...

In your Owner's Manual, there is a Troubleshooting Guide page, for the most common potential issues (some wood manuals have a 'Helpful Hints' section instead).

We also have a 'Walk-Through' Troubleshooting Guide on this site...just go to the main FAQ page and choose 'Troubleshooting' under the Categories, and click Filter.

And, as always, you may contact a Technical Support specialist toll-free at (800) 245-6489 with any further questions.

How do I install the AC-1339 controller for my wood add-on furnace?

There are two types of AC-1339 controller for our wood add-on furnace (stove models with '35' in the model number): The 'old' (non-pushbutton style) and the 'new,' or current, pushbutton style.

Click Here for instructions regarding the hook-up of the current, pushbutton-type AC-1339 controller.

Click Here for instructions regarding the old, non-pushbutton version of the AC-1339 controller.

How do I install window trim (basic instructions)?

Window trim is simple to install and can add that 'extra touch' to the look of your stove.

Click Here to see the basic instructions for adding window trim to your stove.

How do I replace the AC-FCGK flue collar gasket?

Click Here for an instruction sheet that shows how to replace the AC-FCGK flue collar gasket for your wood stove.

How do I replace the door gasket on my stove?

Our wood and pellet models have various types of door styles, but all door gaskets are replaced in very similar ways.

Click Here for instructions for removing and replacing the door gasket on your stove.

How do I replace the glass gasket on my stove?

Like the door gaskets on the various models, glass gaskets are replaced in very similar ways across the wood and pellet stove designs.

Click Here for instructions for removing and replacing the glass gasket on your stove.

What about external thermostats for pellet stoves or wood furnaces?

A Note on our Add-On Wood Furnace: Do NOT use an external thermostat on our 28-3500/50-SHW35/50-TRW35 whole house add-on furnace. Follow the instructions in the manual pertaining to the controller that is included with our furnace, and contact us if you have any further questions.

Pellet Units:
There is now a Remote Thermostat that may be used on our pellet units.

It is actually easier to install than a wall thermostat, and can be installed in about 5 minutes!
Click Here to see the Remote Thermostat

External Wall Thermostat for Pellet (or Multi-Fuel) Stoves: When using an external wall thermostat with our pellet freestanding or insert models, do not place it more than 14’ (fourteen feet) from the stove.
An external thermostat (such as our Part No. PU-DTSTAT) can be used on our pellet units as long as it is a 24-volt that works with millivolt systems.

Instructions: After unplugging the stove, locate the jumper wire on the bottom of the control panel (J-3). The two screws should then be loosened and the jumper wire removed from the board. Next, the two thermostat lead wires should be connected at this location and the screws tightened; the jumper wire should be saved for future operation without a thermostat. More information can be found here.
The pellet stove will operate differently once the wall thermostat is installed -- see your owner's manual and contact us with any questions.

If you need more information on this, please call Technical Support at (800) 245-6489 or  email us.

Will a wood or pellet stove save me money? Is this for me?

We've all heard  many of the great reasons for purchasing a wood (or wood pellet) stove...

Wood and Pellet Stoves Save Money

We've all heard  many of the great reasons for purchasing a wood (or wood pellet) stove.

       A few of the more popular reasons are:
       -It uses renewable fuel
       -The fuel is widely available
       -It makes you more self-reliable and independent from oil, electricity, etc.
       -The heat just feels "better" and the flame is cozy and beautiful to look at

      But the main thing on many people's minds who are considering the purchase of a wood, pellet or multi-fuel stove is:
    "Will a wood stove, multi-fuel or pellet stove save me money?"

Please take a few moments to look below at some of the resources we've gathered that address the advantages of heating with wood or wood pellet fuel.  They cover many of the great perks of burning with wood and pellets, including the reasons listed above - and, yes, we've even included handy fuel calculators, so you can get an idea of how much money you can save. Enjoy!

Fuel Calculators

First things first...

The Hearth, Patio & Barbecue Association (HPBA) has put together a quick Fuel Efficiency Calculator that can give you an idea of how much money you may be able to save annually.  You can even enter your own costs, if you want to be more accurate.

Want to try some other calculators?

Pellet Fuels Institute has a nice Fuel Calculator chart here

And hearth.com has a great Fuel Calculator of their own, here

But wait, there's more...

--We're always touting the fact that we have so many EPA Certified (and WA State approved) wood, pellet and multi-fuel stoves in our line-up. The question has been asked before: "What's so great about that?"
Well, less smoke and more efficiency means that, besides being great for the environment (and easier on your neighbors), it actually saves you even more money.
The EPA has some good information that answers the question:  "Will switching to an EPA Certified stove really save me money?"

--The HPBA also has a short overview of how to choose the right stove for your home, here

--To help you narrow your options and explore the benefits of our stoves even further, we've put together an article that goes into some detail describing how you can choose the best stove for your needs

--Mother Earth News has an article entitled "Is Wood Heating Right for You?"  It covers some of the benefits of heating with wood and helps you decide if it's really for you.

--Click Here for more E.S.W. News Items

And, finally,

--Click here for Our Home Page to see specific Englander, Timber Ridge and Summers Heat stove descriptions for wood, pellet and multi-fuel models.

How do I track my parts order?

We take pride in our Technical Support as well as our fast shipping, so rest assured that your parts order will be processed asap.  Here's how to track your parts order from England's Stove Works:

(PLEASE NOTE -- FOR WEB AND PHONE ORDERS: We do enter and ship orders asap, but please give at least one to two business days after placing your order before you attempt to track it, so that it can get into the tracking system.)

WEB ORDERS:  Click Here to go to the UPS Tracking page to track "by Reference Number." In the Reference Number field on the UPS site, simply enter the (shipping) zip code that you used when placing your web order, then the order number that our online shopping program gave you, with NO spaces...(for example: 2457486523). Click the "Track" button -- it's that simple!

ORDERS THAT ARE PHONED IN:  Click Here to go to the UPS Tracking page to track "by Reference Number." In the Reference Number field on the UPS site, enter the (shipping) zip code that you used when placing your phoned-in order, then the order (or claim) number that our Customer Service rep. gave you, with NO spaces...(for example: 2457486523). Click the "Track" button -- again, it's that simple!

Note: If you do not have this information, you may call (800) 245-6489 and we can find and track your order for you...but if you have this information, please keep it handy, it can save you time if you track your order yourself.

How do I replace the ash pan gasket?

Click Here for instructions for replacing the ash pan gasket on your pellet stove.

How do I replace the refractory boards and/or the burner tubes in my wood stove?

The wood stoves that use refractory boards (stoves with '17' in the model number) also have burner tubes, and both sets of components are necessary for proper combustion.

You may find it necessary to replace some of these components at some point.

Click Here to view an instruction sheet detailing this procedure (and don't forget to check your Owner's Manual for more information, and call Tech. Support at (800) 245-6489 with any questions).

What is this white board(s) and tubes that are in the top of my wood stove? How do I replace it?

PLEASE NOTE:  The non-catalytic wood stove models utilize a new technology, which includes a ceramic fiber board that is located in the firebox,

and rests on top of 3 stainless steel tubes. (Stoves with a '30' in the model number have 4 stainless steel tubes, and 2 pieces of fiber board).

DO NOT remove this fiber board! It is a necessary component of the firebox. 

Also, please note: The ceramic fiber board may become loose during initial shipping.  Be sure it is lying flat, on top of the stainless steel tubes, and pushed all the way to the back of the unit, with no gaps between it and the back wall. Consult your Owner's Manual, and call Technical Support at (800) 245-6489 if questions. 

See the images below for reference, and

Click Here for instructions for removing and installing fiber board and burner tubes in stoves with '13' in the model number, and

Click Here for instructions for removing and installing fiber board and burner tubes in stoves with '30' in the model number.

    

What type of fuel is best for me and my family?

If you're trying to decide which type of fuel to go with as you look at better heating options, please hop over to our News page and check out the article 'What Type of Fuel is Best for Me and My Family?':

Click here to visit our News page

What’s so great about being EPA and Washington State Certified?

Look  for this “EPA Certified” logo throughout our site:

Our stoves are EPA Certified

Most of our stoves are EPA Certified, which means that an independent, accredited laboratory has tested the stove and determined that it meets EPA Phase II particulate emissions limit standards (7.5 grams or less per hour for non-catalytic wood stoves & pellet stoves, 4.1 grams or less per hour for catalytic stoves). 

Washington State takes its requirements even further: wood stoves offered for sale in the state of Washington must meet a particulate emissions limit of 4.5 grams per hour for non-catalytic wood stoves & pellet stoves
and 2.5 grams per hour for catalytic.

What does this mean for you?  Besides having peace of mind that you are burning "cleaner and greener” with far less pollution, EPA certified wood and pellet stoves are often much higher in efficiency than uncertified units.  This means you use less fuel for the same amount of heat, saving you money!


For more info visit the United States Environmental Protection Agency website at http://www.epa.gov/oecaerth/resources/publications/monitoring/caa/woodstoves/certifiedwood.pdf

Click on the video below to check out the great features of this stove!